Menu
 Introduction
 Catalogue
 Essay
 Handlist
 Museums
 Makers
 Bibliography
 Places
 Conventions
 Articles
 Credits
 Glossary
 Help
 Search
 Index
 Glossary
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 

19 to 38 of 227 glossary terms
azimuth dial: sundial depending on measurement of horizontal angles, see article on the sundial.
Babylonian hours: system of hour reckoning, see article on time and date.
baseline: measured distance between two positions used as the observing stations for a triangulation survey; angles measured from this line serve to locate the other points in the survey.
Butterfield dial: type of sundial adjustable for latitude, whose gnomon incorporates a latitude pointer often in the form of a bird. This dial type is associated with the 17th-century Paris-based English maker Michael Butterfield.
calendar: system of reckoning dates, see article on time and date.
calendar-zodiac scale: scales relating the sun's position in the zodiac to the date.
caliper: instrument used to take dimensions. One type has two curved legs whose endpoints are used to determine the diameters of spheres.
Cardan suspension: universal mounting attributed to the 16th-century Italian philosopher and physician Girolamo Cardano which, by means of gimbals, allows the supported part to remain horizontal irrespective of the orientation of the rest of the instrument.
cardinal points: the main directions on the mariner's compass, north, south, east and west.
carpenter's rule: measuring ruler carrying one or more scales for calculating the volume of timber or the surface area of board or planking.
celestial globe: globe marked with the positions of the stars.
celestial planisphere: map of the heavens, produced by geometrical projection of a sphere on to a flat surface. A common example of the use of a form of planisphere is the rete of an astrolabe.
celestial poles: diametrically opposite points of the celestial sphere about which the heavens are observed to rotate once a day.
celestial sphere: sphere in the heavens on which the celestial motions are considered to be moving for the purpose of positional measurements from earth. It is far enough away for the earth's size to be negligible in relation to the distance of the stars, so that all observers can be considered to be at the centre of the celestial sphere.
celestial spheres: system of concentric, rotating orbs centred on the earth, proposed by Aristotle and others as constituting the physical construction of the heavenly system of planets and stars.
chalice dial: sundial where the hour lines are inscribed on the inside surface of a goblet. A second set of lines can be included to allow for refraction, when the goblet is full. See also scaphe dial.
circumferentor: form of surveying compass with fixed sights, where bearings are read from the position of a magnetic compass, see also article on the theodolite.
climates: division into latitude zones of the part of the earth known to ancient geographers, used by Ptolemy.
clinometer: an instrument for measuring inclination.
common hours: system of hour reckoning, see article on time and date.
Previous Next || First Last 
Show 5 | 10 | 20 | 50 | 100 | 227 terms at a time
|| Introduction || Essay || Museums || Bibliography || Conventions || Credits || Privacy || Help ||
|| Catalogue entries || Handlist || Makers || Places || Articles |Glossary |Search || Home ||