64 matching record(s)
B Matthews, Martin
Engine Turning 1680-1980: The Tools and Technique
[Otford, Sevenoaks: the Author, 1984].
[1985-124]
1984
B Maurice, Klaus
Der Drechselnde Souveran: Materialien zu einer furstlichen Maschinenkunst / Sovereigns as Turners: Materials on a Machine Art by Princes
Translated by Dorothy Ann Schade; Zurich: Verlag Ineichen, 1985. (Parallel text in German and English)
[1987-77]
1985
B (Open Shelf)Tool and Trades History Society ; Rees, Jane
Tools & trades : the 25th anniversary collection, 1983-2008
[edited by Jane Rees]. [s.l.] : The Tools & Trades History Society, c2009. "Extracts from the journals and newsletters of the Tools & Trades History Society" -- cover.
2009
B (Stack - oversize)An Amateur [Engleheart, N. B.]
A Concise Treatise on Eccentric Turning: to which are added Practical Observations on the uses of the Eccentric Cutting Frame, the Drilling Frame, and the Universal Cutting Frame
Illustrated by Figures and Eccentric Patterns: with full instructions as to the modes by which such patterns may be effected. By An Amateur. London: Pelham Richardson, 1852. Inscribed 'To W. H. Merle Esqre / With the very sincere Regards of / (the Author) / NBEngleheart.'
[Unknown]
1852
B (Stack - oversize)An Amateur [Engleheart, N. B.]
A Concise Treatise on Eccentric Turning: to which are added Practical Observations on the uses of the Eccentric Cutting Frame, the Drilling Frame, and the Universal Cutting Frame
Illustrated by Figures and Eccentric Patterns: with full instructions as to the modes by which such patterns may be effected. By An Amateur. London: Pelham Richardson, 1852. T. H. T. Hopkins's copy, with notes and drawings (including rubbings of his own turned patterns); Gunther Loan Collection
[1940-6/ ]
1852
B (Stack - oversize)Battison, E. A.
Screw-thread cutting by the Master-Screw Method since 1480
offprint of Paper 37, pp. 105-120, from United States National Museum Bulletin 240: CONTRIBUTIONS FROM THE MUSEUM OF HISTORY AND TECHNOLOGY; Smithsonian Institution, Washington, D.C. 1964. Additional copy in the Bulletin 240 volume. Transferred to Bodleian, September 2017.
[1965-31/4]
1964
B (Stack - oversize)Bergeron, L. E.
The Turner's Manual
being a complete translation of the valuable work by L. E. Bergeron (Translated by "D.A.A.") with the improvements and alterations introduced up to the present time. Illustrated with fine woodcuts and Lithographic Engravings of the Original Plates, also of the various modern appliances. Being a perfect edition of the work of M. ... , supplemented with original notes and appendices. London: F. Offen, 1877. Gunther Loan Collection
[1940-6/ ]
1877
B (Stack - oversize)Bergeron, L. E.
Manuel du Tourneur
Precede de notions elementaires. Seconde edition (1816). In two volumes, and an "Atlas" of plates. Paris: Hamelin-Bergeron, 1816. Revue, corrigee, et considerablement augmentee, par P. Hamelin-Bergeron.
[Unknown]
1816
B (Stack - oversize)Cooper, Denis R.
The Art and Craft of Coinmaking: A History of Minting Technology
London: Spink & Son, 1988.
[1991-28]
1988
B (Stack - oversize)Crom, Theodore R.
Horological Shop Tools 1700 to 1900
Melrose, Florida: Theodore R. Crom, 1980.
[1981-155]
1980
B (Stack - oversize)Crom, Theodore R.
Horological and Other Shop Tools 1700 to 1900
Melrose, Florida: Theodore R. Crom, 1987. (Companion volume to the author's 1980 work). Transferred to Bodleian, September 2017.
[1991-15]
1987
B (Stack - oversize)Engleheart, N. B.
A Concise Treatise on Eccentric Turning: to which are added Practical Observations on the uses of the Eccentric Cutting Frame, the Drilling Frame, and the Universal Cutting Frame
Illustrated by Figures and Eccentric Patterns: with full instructions as to the modes by which such patterns may be effected. By N. B. Engleheart. London: Holtzapffel & Co., 1867. [Second edition; for pseudonymous first edition, 1852, see An Amateur]. Edward Chapman's copy, with annotations; Gunther Loan Collection
[1940-6/ ]
1867
B (Stack - oversize)Frazier, Arthur H.
Joseph Saxton and his contributions to the medal ruling and photographic arts
Smithsonian Studies in History and Technology, no. 32. Washington: Smithsonian Institution Press, 1975. Transferred to Bodleian, September 2017.
[1976-69]
1975
B (Stack - oversize)Harris, Elizabeth M.
Sir William Congreve and his Compound-Plate Printing
United States National Museum Bulletin 252 | Contributions from The Museum of History and Technology: Paper 71 (pp. 69-87); Washington, D.C.: Smithsonian Institution Press, 1967 Transferred to Bodleian, September 2017.
[1967-335]
1967
B (Stack - oversize)Plumier, Charles
L'Art de Tourner, ou de Faire en Perfection Toutes Sortes d'Ouvrages au Tour
Lyon: chez Jean Carte, Marchand Libraire rue Merciere a l'Enseigne de la Trinite, 1701. Gunther Loan Collection.
[Unknown]
1701
B (Stack - oversize)Rich, Charles H.
Specimens of the Art of Ornamental Turning, in eccentric and concentric patterns; intended chiefly for the use of beginners
Southampton: Printed and sold by E. Skelton & Co., no. 22, High-Street, and sold by G. and W. B. Whittaker, 13, Ave-Maria Lane, London. 1819.
[Unknown]
1819
B (Stack - oversize)Smith, Alan (ed.)
A Catalogue of Tools for Watch & Clock Makers by John Wyke of Liverpool
Charlottesville: University Press of Virginia, 1978. Transferred to Bodleian, September 2017.
[1979-110]
1978
B (Stack - oversize)Steeds, W.
A History of Machine Tools, 1700-1910
Oxford: at the Clarendon Press, 1969.
[1969-40]
1969
B (Stack - oversize)Welsh, Peter C.
"Woodworking tools 1600-1900"
offprint from Contributions from the Museum of History and Technology (United States National Museum Bulletin 241) Washington, 1966. Transferred to Bodleian, September 2017.
[1966-196]
1966
B (Stack)Anonymous
The Handbook of Turning: containing instructions in concentric, elliptic, and eccentric turning; also various Plates of Chucks, Tools, & Instruments; and directions for using the eccentric cutter, drill, vertical cutter, and circular rest; with patterns, and instructions for working them
London: Saunders & Otley, 1842.
[Unknown]
1842
B (Stack)Anonymous
The Handbook of Turning: containing instructions in concentric, elliptic, and eccentric turning; also various Plates of Chucks, Tools, & Instruments; and directions for using the eccentric cutter, drill, vertical cutter, and circular rest; with patterns, and instructions for working them
London: Saunders & Otley, 1852. Gunther Loan Collection.
[1940-6/]
1852
B (Stack)Anonymous
The Handbook of Turning: containing instructions in concentric, elliptic, and eccentric turning; also various Plates of Chucks, Tools, & Instruments; and directions for using the eccentric cutter, drill, vertical cutter, and circular rest; with patterns, and instructions for working them
London: Saunders & Otley, 1859. Gunther Loan Collection.
[1940-6/]
1859
B (Stack)Anonymous [Lukin, James]
The Amateur Mechanic's Workshop: a treatise containing plain and concise directions for the manipulation of wood and metals, including casting, forging, brazing, soldering, and carpentry
London: Trubner and Co., 1870.
[Unknown]
1870
B (Stack)Bazley, Thomas Sebastian
Index to the Geometric Chuck: a Treatise upon the Description, in the Lathe, of Simple and Compound Epitrochoidal or "Geometric" Curves
London: Lithographed, Printed, and Published for the Author, by Waterlow and Sons, and sold by Holtzapffel & Co., 1875. Gunther Loan Collection (* letter)
[1940-6/ ]
1875
B (Stack)Carle, Donald de
The Watchmaker's Lathe and how to use it
London: Robert Hale, 3rd edition 1980. Transferred to Bodleian, September 2017.
[1980-240]
1980
B (Stack)Crom, Theodore R.
Horological Wheel Cutting Engines, 1700 to 1900
Gainesville, Florida: [the author], 1970. Transferred to Bodleian, September 2017.
[1970-132]
1970
B (Stack)Dane, E. Surrey
Peter Stubs and the Lancashire Hand Tool Industry
Altrincham: Published by John Sherratt and Son Ltd., 1973.
[1974-161]
1973
B (Stack)Disston, Henry, & Sons
The Saw in History
Philadelphia: Henry Disston and Sons, 1922. Transferred to Bodleian, September 2017.
[1972-23]
1922
B (Stack)Disston, Henry, & Sons
The File in History
Philadelphia: Henry Disston and Sons, 1922. Transferred to Bodleian, September 2017.
[1972-22]
1922
B (Stack)Gilbert, K. R.
Catalogue of Exhibits with Historical Introduction: The Machine Tool Collection
Science Museum. London: H. M. S. O., 1966. Shelved under Science Museum.
[1966-214]
1966
B (Stack)Goodeve, T. M.; Shelley, C. P. B.
The Whitworth Measuring Machine
Including descriptions of the surface plates, guages, and other measuring instruments, made by Sir Joseph Whitworth, Bart., C.E. F.R.S. D.C.L. LL.D. &c. London: Longmans, Green, & Co., 1877. Edward Chapman's copy; R. T. Gunther Collection
[1940-6/ ]
1877
B (Stack)Goold, Joseph; Benham, Charles E.; Kerr, Richard; Wilberforce, L. R.
Harmonic Vibrations and Vibration Figures
London: Published by Newton and Co., Scientific Instrument Makers, n.d. [?1909]. Edited by Herbert C. Newton. (Mainly written by Newton, Benham, and Goold).
[1993-40]
1909?
B (Stack)Hartmann, Carl
Die Werkzeuge der Holz- u. Hornarbeiter, namentlich der Zimmerleute, Tischler, Drechsler, Bottcher, Stellamacher etc. Nach den Ungaben des vornehmsten englischen Werkzeugsfabrikanten, Carl Holkapsel in London und nach sonstigen guten Hulfsmitteln fur deutsche Bedurfnisse bearbeitet
Weimar: V. F. Voigt, 1856. Gunther Loan Collection
[1940-6/ ]
1856
B (Stack)Hasluck, Paul N.
Lathe-work: A practical treatise on the tools, appliances, and processes employed in the Art of Turning Including hand-turning, boring and drilling, the use of slide-rests and overhead gear, screw-cutting by hand and self-acting motion, wheel-cutting, etc., etc.
London: Crosby Lockwood & Co., 1881. Gunther Loan Collection.
[1940-6/ ]
1881
B (Stack)Hawley, Ken ; Watts, Dennis
Wooden spokeshaves
[Sheffield] : Published for the Hawley Collection Trust by the Tools and Trades History Society, c2007. Presented by the publisher.
[2007-53]
2007
B (Stack)Holtzapffel & Co.
Untitled
Holtzapffel & Co., 53, Haymarket, S. W. formerly at no. 64, Charing Cross, London, S.W. Catalogue of lathes, turning tools, etc.; one copy contains Price List of Lathes and Apparatus. London: Holtzapffel & Co., n.d. 2 copies. Gunther Loan Collection [?both]
[1940-6/ ]
[n.d.]
B (Stack)Holtzapffel, Charles
Turning and Mechanical Manipulation. Intended as a work of general reference and practical instruction, on the lathe, and the various mechanical pursuits followed by amateurs
5 vols. London: published for the author by Holtzapffel & Co., 1846-1884. [Says 6 volumes but the sixth was never published.] Formerly the property of T. H. T. Hopkins. Gunther Loan Collection
[1940-6/ ]
1846-1884
B (Stack)Ibbetson, John Holt
Specimens in Eccentric Circular Turning, with practical instructions for producing corresponding pieces in the art
3rd ed. with considerable Additions, including a description and copper-plate engravings of the Compound Eccentric Chuck constructed by the Author. London: Longman, [1838]. Gunther Loan Collection (formerly the property of T. H. T. Hopkins).
[1940-6/]
1838
B (Stack)Ibbetson, John Holt
Specimens in Eccentric Circular Turning, with Practical Instructions for producing Corresponding Pieces in the Art
3rd ed. with considerable Additions, including a description and copper-plate engravings of the Compound Eccentric Chuck constructed by the Author. London: Longman, [1838]. Royal Microscopical Society Collection
[1978-833]
1838
B (Stack)Ibbetson, John Holt
Specimens in Eccentric Circular Turning, with practical instructions for producing corresponding pieces in the art
3rd ed. with considerable Additions, including a description and copper-plate engravings of the Compound Eccentric Chuck constructed by the Author. London: Longman, [1838]. Gunther Loan Collection.
[1940-6/]
1838
B (Stack)Jones, Franklin D.
Mechanical Drawing
Being a Treatise on the drawing of Mechanisms and machine details, including the making of different classes of drawings, the dimensioning, reading, and checking of working drawings, and general drafting-room practice. Second Edition (1931); The Industrial Press, New York. London: The Machinery Publishing Co., Ltd. Transferred to Bodleian, September 2017.
[1959-74]
1931
B (Stack)Klemm, Friedrich
Der Beitrag des Mittelalters zur Entwicklung der abendlandischen Technik
Beitrage zur Geschichte der Wissenschaft und der Technik, heft 2, 1961. (Edited by Bernhard Sticker). Delivered in Luneburg am 28. August 1960. Wiesbaden: Franz Steiner verlag GMBH., 1961.
[1962-151]
1961
B (Stack)Lindsay, James Ludovic 26th earl of Crawford
Screw-cutting Tables, for Engineers and Machinists: giving the values of the different trains of wheels required to produce screws of any pitch
London: E. & F. N. Spon, 1878.
[Unknown]
1878
B (Stack)Lukin, J. ("J. L.")
The Lathe and its Uses; or, Instruction in the Art of Turning Wood and Metal. Including a description of the most modern appliances for the ornamentation of plane and curved surfaces an entirely novel form of lathe for eccentric and rose-engine turning; a lathe and planing machine combined; and other valuable matter relating to the Art.
4th ed. London: Trubner & Co., 1874. Gunther Loan Collection.
[1940-6/ ]
1874
B (Stack)Martin, W. A.
Screw-cutting Tables, for the use of Mechanical Engineers. Showing the proper arrangement of wheels for cutting the threads of screws of any required pitch, with a table for making the universal gas-pipe threads and taps
2nd ed. London: E. and F. N. Spon, 1866. Formerly the property of T. H. T. Hopkins.
[Unknown]
1866
B (Stack)Northcott, W. Henry
A Treatise on Lathes and Turning: Simple, mechanical, and ornamental
2nd ed.. London: Longmans, Green, and Co., 1876. Gunther Loan Collection.
[1940-6/ ]
1876
B (Stack)Robertson & Co., W. H. A.
The Robertson Guide to World Screw Thread Series Symbols
With illustrations of 180 World Screw Thread Forms. Compiled by the Small Part Division of W. H. A. Robertson & Co. Ltd. International Specialists in Dies and Chasers Lynton Works, Bedford, England; n.d. [1962?]. Presented by the Royal Microscopical Society Transferred to Bodleian, September 2017.
[1970-74]
1962?
B (Stack)Rolt, L. T. C.
Tools for the Job
London: Batsford, 1965.
[1966-162]
1965
B (Stack)Roret, Encyclopedie-
Nouveau manuel complet du Tourneur
Atlas du tome 3 supplementaire. Paris: Librairie Encyclopedique de Roret, [s.d.]. Gunther Loan Collection.
[1940-6/ ]
[n.d.]
B (Stack)Royal Society of Arts
Report of the Committee of the Society of Arts, &c. together with the Approved Communications and Evidence upon the Same, relative to the mode of Preventing the Forgery of Bank Notes
Printed by Order of the Society. London, 1819. Sold at the Society's House in the Adelphi; and by all booksellers. Formerly the property of the Radcliffe Observatory.
[Unknown]
1819
B (Stack)Schlosser, E.
Die Munztechnik: Ein Handbuch fur Munztechniker, Medaillenfabrikanten, Gold- und Silberarbeiter, Graveure und technische Chemiker
Hannover: Hahn'sche Buchhandlung, 1884
[1969-165]
1884
B (Stack)Suter, H.
"Uber die Projektion der Sternbilder und der Lander von Al-Biruni"
photocopy from Abhandlungen zur Geschichte der Naturwissenschaften, fasc. 4, 1922. Erlangen: 1922.
[1966-311]
1922
B (Stack)Taylor, Charles
Curves formed by the action of the Single and Compound Geometric Chuck
With explanatory letterpress. Engraved and Printed by Charles Taylor. London: [s.n.], 1874. Gunther Loan Collection.
[1940-6/ ]
1874
B (Stack)Teubers, Johann Martin
Vollstandiger Unterricht von der gemeinem und hohern Dreh-Kunst, worinnen nicht nur was von beyden zu wissen nothig / deutlich beschrieben / sondern auch alle dahin gehorige Werke, Kunst-Machinen, und Instrumenta, samt 40. Kunst-Stucken in XXXI. Kupsser-Tasseln vor Augen geleget werden: …
Regenspurg, gedrucht ven Johann Baptist Lang. 1740. 4to. Gunther Loan Collection
[1940-6/ ]
1740
B (Stack)Valicourt, E. de
Nouveau manuel complet du Tourneur ou traite theorique et pratique de l'Art du Tour
In the series "Manuels-Roret". Nouvelle edition entierement refondue et redigee sur un nouveau plan. Ouvrage accompagne d'un atlas. 3 vols. and an "Atlas". Paris: Librairie Encyclopedique de Roret, 1872. Gunther Loan Collection
[1940-6/ ]
1872
B (Stack)Watson, Egbert P.
A Manual of the Hand Lathe: comprising concise directions for working metals of all kinds, ivory, bone and precious woods; dyeing, coloring, and french polishing; inlaying by veneers, and various methods practiced to produce elaborate work with dispatch, and at small expense
Philadelphia: Henry Carey Baird; London: Sampson Low, 1879. Gunther Loan Collection.
[1940-6/ ]
1879
B (Stack)White, Allen
The Chain Makers: A history of the watch fusee chain industry
Hants, 1967. Transferred to Bodleian, September 2017.
[1967-349]
1967
B (Stack)Woodbury, R. S.
History of the Grinding Machine
Cambridge, Mass.: Technology Press, Massachusetts Institute of Technology, 1959. Transferred to Bodleian, September 2017.
[1967-17]
1959
B (Stack)Woodbury, R. S.
History of the Lathe to 1850
Cleveland, Ohio: Society for the History of Technology}, 1961.
[1965-194]
1961
B (Stack)Woodbury, Robert S.
History of the Gear-Cutting Machine
A Historical Study in Geometry and Machines with a Foreword by Abbott Payson Usher. Number One in the Historical Series of "Technology Monographs". The Technology Press, Massachusetts Institute of Technology, Cambridge 39, Massachusetts. 1958. Transferred to Bodleian, September 2017.
[1960-143]
1958
B (Stack)Woodbury, Robert S.
History of the Milling Machine: A Study in Technical Development
Cambridge, Mass.: The M.I.T. Press, Massachusetts Institute of Technology, second printing, April 1964 (first 1960). Ex libris M. O. Holbrook Transferred to Bodleian, September 2017.
[1983-29]
1964
B (Stack)Woodcroft, B. (ed.)
Abridgments of Specifications relating to Plating or Coating Metals with Metals
In the series 'Patents for Inventions'. Printed by Order of the Commissioners of Patents. London: Printed by George E. Eyre and William Spottiswoode, Printers to the Queen's Most Excellent Majesty. Published at the Great Seal Patent Office, 25, Southampton Buildings, Holborn, 1862. Formerly the property of Hull Subscription Library
[Unknown]
1862
B (Stack)Woodcroft, B. (ed.)
Abridgments of Specifications relating to Plating or Coating Metals with Metals: Part II. - A.D. 1861-1866
In the series 'Patents for Inventions'. Printed by Order of the Commissioners of Patents. 2nd ed. London: Printed by George E. Eyre and William Spottiswoode, Printers to the Queen's Most Excellent Majesty. Published at the Great Seal Patent Office, 25, Southampton Buildings, Holborn, 1872.
[Unknown]
1872
B (Stack)Zagorskii, F. N.
An Outline of the History of Metal Cutting Machines to the Middle of the 19th Century
Translation updated by the editor, Edwin A. Battison ... with the cooperation and approval of the author. (Translated by S. P. Pedneker). New Delhi: Amerind Publishing Co., 1982. Translation of Ocherki po Istorii Metallorezhushchikh Stankov do Serediny XIX Veka (Moscow & Leningrad: Akademiya Nauk SSSR Publishers, 1960).
[1984-302]
1982